<delect id="ppfbv"><video id="ppfbv"></video></delect>

          <ins id="ppfbv"><em id="ppfbv"></em></ins>

          <font id="ppfbv"></font>

          國產焊接機器人

          • 型號:

            國產焊接機器人
          • 應用類型:

            焊接機器人
          • 適用產品行業:

            弧焊等
          • 配置:

            機器人、焊機、安裝調試
          • 廠家:

          同類產品推薦

          • 數控機床上下料機器人
          • 紙箱碼垛機器人(吸盤式)
          • 紙箱碼垛機器人(夾抱式)
          • 袋裝(大米等)碼垛機器人

          139-2940-8368

          180-2515-1739

          • 產品詳情
           
          動作類型:垂直多關節型
          最大負載:10kg
          運動半徑:1440mm
          重量:170kg
          軸數:6軸
          安裝方式:地面、頂裝
          周圍溫度:0℃~45℃
          適用行業:焊接、切割、裝配、搬運、打標、打磨
          其他:機器人安裝地必須遠離:易燃或腐蝕性液體或者氣體電氣干擾源。
           
          Model: CRP-RH14-10-W
          Movement type: vertical multi-joint type
          Maximum load: 10kg
          Movement radius: 1440mm
          Weight: 170kg
          Number of axes: 6 axes
          Installation method: ground, top-mounted
          Ambient temperature: 0℃~45℃
          Applicable industries: welding, cutting, assembly, handling, marking, grinding
          Others: The robot installation place must be far away from: flammable or corrosive liquid or gas electrical interference source.
          功能特點
          · 臂展1.4米。設計高度緊湊,可靈活選擇地面安裝或倒置安裝。
          · 工作空間大、運行速度快、重復定位精度高,適用于焊接、噴涂、上下料、搬運、分揀、裝配等應用,適用范圍廣。
          · 配置獨立于控制系統的安全急停板,采用安全繼電回路,對外提供雙回路急停,確保急停的可靠性。
          · 本體電纜采用高柔機器人專用電纜。
          · 內置三相變壓器,380V和200V進行隔離,電源更穩定。內裝三相濾波器,有效改善EMC和EMI性能。
          · 本體提供雙回路氣管,滿足焊接、搬運的需求。
          · 6軸的中孔內徑為46mm,可滿足水冷槍、波紋管槍的安裝要求。
          · 內置高柔焊接電纜。
           
          Features
          · Wingspan of 1.4 meters. The design is highly compact, and it can be flexibly installed on the ground or upside down.
          · Large working space, fast running speed, high repeat positioning accuracy, suitable for welding, spraying, loading and unloading, handling, sorting, assembly and other applications, with a wide range of applications.
          · Equipped with a safety emergency stop board independent of the control system, adopts a safety relay circuit, and provides external double-circuit emergency stop to ensure the reliability of the emergency stop.
          · The main body cable adopts high-flexible robot special cable.
          · Built-in three-phase transformer, 380V and 200V for isolation, the power supply is more stable. Built-in three-phase filter, effectively improve EMC and EMI performance.
          · The body provides dual-circuit air pipes to meet the needs of welding and handling.
          · The inner diameter of the middle hole of the 6-axis is 46mm, which can meet the installation requirements of water-cooled guns and bellows guns.
          · Built-in high flexible welding cable.
          焊接機器人臂展示意圖
           

          國產機器人尺寸焊接機器人法蘭和底座

          國產焊接機器人參數

          分享到:
          国产超级乱婬视频播放,国产成a人片在线关看视频,国产成a人片在线观看网站,国产成人18禁在线播放,国产成人5g影院无码网站